Location:HOME > NEWS > Hot press forming of pipe tee

Hot press forming of pipe tee

2022-07-19 09:51:30   COMMENT:0 HITS:
  Hot press forming of pipe tee is to flatten the tube blank larger than the pipe tee diameter to the size of pipe tee diameter, and open a hole at the position of drawing branch pipe; the tube blank is heated, put into the forming die, and put into the stamping die of drawing branch pipe; under the effect of pressure, the tube blank is compressed radially, in the process of radial compression, the metal flows towards the 150lb Screwed Stainless Steel Equal Pipe Tee and forms the branch pipe under the drawing of the stamping die.

  The whole process is formed by the radial compression of the tube blank and the drawing of the branch pipe. Different from the hydraulic expansion pipe tee, the metal of hot pressed pipe tee is compensated by the radial movement of tube blank, so it is also called radial compensation process.

  Due to the use of heating and pressing pipe tee, the tonnage of equipment required for material forming is reduced. Hot pressed pipe tee has wide adaptability to materials, which is suitable for low-carbon steel, alloy steel and stainless steel; especially for large-diameter and thick pipe wall pipe tee, this forming process is usually adopted.

next_pageWhat is the usefulness of flange?